1/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ 2/* 3 * This file is part of the LibreOffice project. 4 * 5 * This Source Code Form is subject to the terms of the Mozilla Public 6 * License, v. 2.0. If a copy of the MPL was not distributed with this 7 * file, You can obtain one at http://mozilla.org/MPL/2.0/. 8 * 9 * This file incorporates work covered by the following license notice: 10 * 11 * Licensed to the Apache Software Foundation (ASF) under one or more 12 * contributor license agreements. See the NOTICE file distributed 13 * with this work for additional information regarding copyright 14 * ownership. The ASF licenses this file to you under the Apache 15 * License, Version 2.0 (the N_("License"); you may not use this file 16 * except in compliance with the License. You may obtain a copy of 17 * the License at http://www.apache.org/licenses/LICENSE-2.0 . 18 */ 19 20#pragma once 21 22#include <basic/sberrors.hxx> 23#include <unotools/resmgr.hxx> 24#include <vcl/errcode.hxx> 25 26#include <utility> 27 28#define NC_(Context, String) TranslateId(Context, reinterpret_cast<char const *>(u8##String)) 29 30std::pair<TranslateId, ErrCode> const RID_BASIC_START[] = 31{ 32 { NC_("RID_BASIC_START", "Syntax error."), ERRCODE_BASIC_SYNTAX }, 33 { NC_("RID_BASIC_START", "Return without Gosub."), ERRCODE_BASIC_NO_GOSUB }, 34 { NC_("RID_BASIC_START", "Incorrect entry; please retry."), ERRCODE_BASIC_REDO_FROM_START }, 35 { NC_("RID_BASIC_START", "Invalid procedure call."), ERRCODE_BASIC_BAD_ARGUMENT }, 36 { NC_("RID_BASIC_START", "Overflow."), ERRCODE_BASIC_MATH_OVERFLOW }, 37 { NC_("RID_BASIC_START", "Not enough memory."), ERRCODE_BASIC_NO_MEMORY }, 38 { NC_("RID_BASIC_START", "Array already dimensioned."), ERRCODE_BASIC_ALREADY_DIM }, 39 { NC_("RID_BASIC_START", "Index out of defined range."), ERRCODE_BASIC_OUT_OF_RANGE }, 40 { NC_("RID_BASIC_START", "Duplicate definition."), ERRCODE_BASIC_DUPLICATE_DEF }, 41 { NC_("RID_BASIC_START", "Division by zero."), ERRCODE_BASIC_ZERODIV }, 42 { NC_("RID_BASIC_START", "Variable not defined."), ERRCODE_BASIC_VAR_UNDEFINED }, 43 { NC_("RID_BASIC_START", "Data type mismatch."), ERRCODE_BASIC_CONVERSION }, 44 { NC_("RID_BASIC_START", "Invalid parameter."), ERRCODE_BASIC_BAD_PARAMETER }, 45 { NC_("RID_BASIC_START", "Process interrupted by user."), ERRCODE_BASIC_USER_ABORT }, 46 { NC_("RID_BASIC_START", "Resume without error."), ERRCODE_BASIC_BAD_RESUME }, 47 { NC_("RID_BASIC_START", "Not enough stack memory."), ERRCODE_BASIC_STACK_OVERFLOW }, 48 { NC_("RID_BASIC_START", "Sub-procedure or function procedure not defined."), ERRCODE_BASIC_PROC_UNDEFINED }, 49 { NC_("RID_BASIC_START", "Error loading DLL file."), ERRCODE_BASIC_BAD_DLL_LOAD }, 50 { NC_("RID_BASIC_START", "Wrong DLL call convention."), ERRCODE_BASIC_BAD_DLL_CALL }, 51 { NC_("RID_BASIC_START", "Internal error $(ARG1)."), ERRCODE_BASIC_INTERNAL_ERROR }, 52 { NC_("RID_BASIC_START", "Invalid file name or file number."), ERRCODE_BASIC_BAD_CHANNEL }, 53 { NC_("RID_BASIC_START", "File not found."), ERRCODE_BASIC_FILE_NOT_FOUND }, 54 { NC_("RID_BASIC_START", "Incorrect file mode."), ERRCODE_BASIC_BAD_FILE_MODE }, 55 { NC_("RID_BASIC_START", "File already open."), ERRCODE_BASIC_FILE_ALREADY_OPEN }, 56 { NC_("RID_BASIC_START", "Device I/O error."), ERRCODE_BASIC_IO_ERROR }, 57 { NC_("RID_BASIC_START", "File already exists."), ERRCODE_BASIC_FILE_EXISTS }, 58 { NC_("RID_BASIC_START", "Incorrect record length."), ERRCODE_BASIC_BAD_RECORD_LENGTH }, 59 { NC_("RID_BASIC_START", "Disk or hard drive full."), ERRCODE_BASIC_DISK_FULL }, 60 { NC_("RID_BASIC_START", "Reading exceeds EOF."), ERRCODE_BASIC_READ_PAST_EOF }, 61 { NC_("RID_BASIC_START", "Incorrect record number."), ERRCODE_BASIC_BAD_RECORD_NUMBER }, 62 { NC_("RID_BASIC_START", "Too many files."), ERRCODE_BASIC_TOO_MANY_FILES }, 63 { NC_("RID_BASIC_START", "Device not available."), ERRCODE_BASIC_NO_DEVICE }, 64 { NC_("RID_BASIC_START", "Access denied."), ERRCODE_BASIC_ACCESS_DENIED }, 65 { NC_("RID_BASIC_START", "Disk not ready."), ERRCODE_BASIC_NOT_READY }, 66 { NC_("RID_BASIC_START", "Not implemented."), ERRCODE_BASIC_NOT_IMPLEMENTED }, 67 { NC_("RID_BASIC_START", "Renaming on different drives impossible."), ERRCODE_BASIC_DIFFERENT_DRIVE }, 68 { NC_("RID_BASIC_START", "Path/File access error."), ERRCODE_BASIC_ACCESS_ERROR }, 69 { NC_("RID_BASIC_START", "Path not found."), ERRCODE_BASIC_PATH_NOT_FOUND }, 70 { NC_("RID_BASIC_START", "Object variable not set."), ERRCODE_BASIC_NO_OBJECT }, 71 { NC_("RID_BASIC_START", "Invalid string pattern."), ERRCODE_BASIC_BAD_PATTERN }, 72 { NC_("RID_BASIC_START", "Use of zero not permitted."), ERRCODE_BASIC_IS_NULL }, 73 { NC_("RID_BASIC_START", "DDE Error."), ERRCODE_BASIC_DDE_ERROR }, 74 { NC_("RID_BASIC_START", "Awaiting response to DDE connection."), ERRCODE_BASIC_DDE_WAITINGACK }, 75 { NC_("RID_BASIC_START", "No DDE channels available."), ERRCODE_BASIC_DDE_OUTOFCHANNELS }, 76 { NC_("RID_BASIC_START", "No application responded to DDE connect initiation."), ERRCODE_BASIC_DDE_NO_RESPONSE }, 77 { NC_("RID_BASIC_START", "Too many applications responded to DDE connect initiation."), ERRCODE_BASIC_DDE_MULT_RESPONSES }, 78 { NC_("RID_BASIC_START", "DDE channel locked."), ERRCODE_BASIC_DDE_CHANNEL_LOCKED }, 79 { NC_("RID_BASIC_START", "External application cannot execute DDE operation."), ERRCODE_BASIC_DDE_NOTPROCESSED }, 80 { NC_("RID_BASIC_START", "Timeout while waiting for DDE response."), ERRCODE_BASIC_DDE_TIMEOUT }, 81 { NC_("RID_BASIC_START", "User pressed ESCAPE during DDE operation."), ERRCODE_BASIC_DDE_USER_INTERRUPT }, 82 { NC_("RID_BASIC_START", "External application busy."), ERRCODE_BASIC_DDE_BUSY }, 83 { NC_("RID_BASIC_START", "DDE operation without data."), ERRCODE_BASIC_DDE_NO_DATA }, 84 { NC_("RID_BASIC_START", "Data are in wrong format."), ERRCODE_BASIC_DDE_WRONG_DATA_FORMAT }, 85 { NC_("RID_BASIC_START", "External application has been terminated."), ERRCODE_BASIC_DDE_PARTNER_QUIT }, 86 { NC_("RID_BASIC_START", "DDE connection interrupted or modified."), ERRCODE_BASIC_DDE_CONV_CLOSED }, 87 { NC_("RID_BASIC_START", "DDE method invoked with no channel open."), ERRCODE_BASIC_DDE_NO_CHANNEL }, 88 { NC_("RID_BASIC_START", "Invalid DDE link format."), ERRCODE_BASIC_DDE_INVALID_LINK }, 89 { NC_("RID_BASIC_START", "DDE message has been lost."), ERRCODE_BASIC_DDE_QUEUE_OVERFLOW }, 90 { NC_("RID_BASIC_START", "Paste link already performed."), ERRCODE_BASIC_DDE_LINK_ALREADY_EST }, 91 { NC_("RID_BASIC_START", "Link mode cannot be set due to invalid link topic."), ERRCODE_BASIC_DDE_LINK_INV_TOPIC }, 92 { NC_("RID_BASIC_START", "DDE requires the DDEML.DLL file."), ERRCODE_BASIC_DDE_DLL_NOT_FOUND }, 93 { NC_("RID_BASIC_START", "Module cannot be loaded; invalid format."), ERRCODE_BASIC_CANNOT_LOAD }, 94 { NC_("RID_BASIC_START", "Invalid object index."), ERRCODE_BASIC_BAD_INDEX }, 95 { NC_("RID_BASIC_START", "Object is not available."), ERRCODE_BASIC_NO_ACTIVE_OBJECT }, 96 { NC_("RID_BASIC_START", "Incorrect property value."), ERRCODE_BASIC_BAD_PROP_VALUE }, 97 { NC_("RID_BASIC_START", "This property is read-only."), ERRCODE_BASIC_PROP_READONLY }, 98 { NC_("RID_BASIC_START", "This property is write only."), ERRCODE_BASIC_PROP_WRITEONLY }, 99 { NC_("RID_BASIC_START", "Invalid object reference."), ERRCODE_BASIC_INVALID_OBJECT }, 100 { NC_("RID_BASIC_START", "Property or method not found: $(ARG1)."), ERRCODE_BASIC_NO_METHOD }, 101 { NC_("RID_BASIC_START", "Object required."), ERRCODE_BASIC_NEEDS_OBJECT }, 102 { NC_("RID_BASIC_START", "Invalid use of an object."), ERRCODE_BASIC_INVALID_USAGE_OBJECT }, 103 { NC_("RID_BASIC_START", "OLE Automation is not supported by this object."), ERRCODE_BASIC_NO_OLE }, 104 { NC_("RID_BASIC_START", "This property or method is not supported by the object."), ERRCODE_BASIC_BAD_METHOD }, 105 { NC_("RID_BASIC_START", "OLE Automation Error."), ERRCODE_BASIC_OLE_ERROR }, 106 { NC_("RID_BASIC_START", "This action is not supported by given object."), ERRCODE_BASIC_BAD_ACTION }, 107 { NC_("RID_BASIC_START", "Named arguments are not supported by given object."), ERRCODE_BASIC_NO_NAMED_ARGS }, 108 { NC_("RID_BASIC_START", "The current locale setting is not supported by the given object."), ERRCODE_BASIC_BAD_LOCALE }, 109 { NC_("RID_BASIC_START", "Named argument not found."), ERRCODE_BASIC_NAMED_NOT_FOUND }, 110 { NC_("RID_BASIC_START", "Argument is not optional."), ERRCODE_BASIC_NOT_OPTIONAL }, 111 { NC_("RID_BASIC_START", "Invalid number of arguments."), ERRCODE_BASIC_WRONG_ARGS }, 112 { NC_("RID_BASIC_START", "Object is not a list."), ERRCODE_BASIC_NOT_A_COLL }, 113 { NC_("RID_BASIC_START", "Invalid ordinal number."), ERRCODE_BASIC_BAD_ORDINAL }, 114 { NC_("RID_BASIC_START", "Specified DLL function not found."), ERRCODE_BASIC_DLLPROC_NOT_FOUND }, 115 { NC_("RID_BASIC_START", "Invalid clipboard format."), ERRCODE_BASIC_BAD_CLIPBD_FORMAT }, 116 { NC_("RID_BASIC_START", "Object does not have this property."), ERRCODE_BASIC_PROPERTY_NOT_FOUND }, 117 { NC_("RID_BASIC_START", "Object does not have this method."), ERRCODE_BASIC_METHOD_NOT_FOUND }, 118 { NC_("RID_BASIC_START", "Required argument lacking."), ERRCODE_BASIC_ARG_MISSING }, 119 { NC_("RID_BASIC_START", "Invalid number of arguments."), ERRCODE_BASIC_BAD_NUMBER_OF_ARGS }, 120 { NC_("RID_BASIC_START", "Error executing a method."), ERRCODE_BASIC_METHOD_FAILED }, 121 { NC_("RID_BASIC_START", "Unable to set property."), ERRCODE_BASIC_SETPROP_FAILED }, 122 { NC_("RID_BASIC_START", "Unable to determine property."), ERRCODE_BASIC_GETPROP_FAILED }, 123 // Compiler errors. These are not runtime errors. 124 { NC_("RID_BASIC_START", "Unexpected symbol: $(ARG1)."), ERRCODE_BASIC_UNEXPECTED }, 125 { NC_("RID_BASIC_START", "Expected: $(ARG1)."), ERRCODE_BASIC_EXPECTED }, 126 { NC_("RID_BASIC_START", "Symbol expected."), ERRCODE_BASIC_SYMBOL_EXPECTED }, 127 { NC_("RID_BASIC_START", "Variable expected."), ERRCODE_BASIC_VAR_EXPECTED }, 128 { NC_("RID_BASIC_START", "Label expected."), ERRCODE_BASIC_LABEL_EXPECTED }, 129 { NC_("RID_BASIC_START", "Value cannot be applied."), ERRCODE_BASIC_LVALUE_EXPECTED }, 130 { NC_("RID_BASIC_START", "Variable $(ARG1) already defined."), ERRCODE_BASIC_VAR_DEFINED }, 131 { NC_("RID_BASIC_START", "Sub procedure or function procedure $(ARG1) already defined."), ERRCODE_BASIC_PROC_DEFINED }, 132 { NC_("RID_BASIC_START", "Label $(ARG1) already defined."), ERRCODE_BASIC_LABEL_DEFINED }, 133 { NC_("RID_BASIC_START", "Variable $(ARG1) not found."), ERRCODE_BASIC_UNDEF_VAR }, 134 { NC_("RID_BASIC_START", "Array or procedure $(ARG1) not found."), ERRCODE_BASIC_UNDEF_ARRAY }, 135 { NC_("RID_BASIC_START", "Procedure $(ARG1) not found."), ERRCODE_BASIC_UNDEF_PROC }, 136 { NC_("RID_BASIC_START", "Label $(ARG1) undefined."), ERRCODE_BASIC_UNDEF_LABEL }, 137 { NC_("RID_BASIC_START", "Unknown data type $(ARG1)."), ERRCODE_BASIC_UNDEF_TYPE }, 138 { NC_("RID_BASIC_START", "Exit $(ARG1) expected."), ERRCODE_BASIC_BAD_EXIT }, 139 { NC_("RID_BASIC_START", "Statement block still open: $(ARG1) missing."), ERRCODE_BASIC_BAD_BLOCK }, 140 { NC_("RID_BASIC_START", "Parentheses do not match."), ERRCODE_BASIC_BAD_BRACKETS }, 141 { NC_("RID_BASIC_START", "Symbol $(ARG1) already defined differently."), ERRCODE_BASIC_BAD_DECLARATION }, 142 { NC_("RID_BASIC_START", "Parameters do not correspond to procedure."), ERRCODE_BASIC_BAD_PARAMETERS }, 143 { NC_("RID_BASIC_START", "Invalid character in number."), ERRCODE_BASIC_BAD_CHAR_IN_NUMBER }, 144 { NC_("RID_BASIC_START", "Array must be dimensioned."), ERRCODE_BASIC_MUST_HAVE_DIMS }, 145 { NC_("RID_BASIC_START", "Else/Endif without If."), ERRCODE_BASIC_NO_IF }, 146 { NC_("RID_BASIC_START", "$(ARG1) not allowed within a procedure."), ERRCODE_BASIC_NOT_IN_SUBR }, 147 { NC_("RID_BASIC_START", "$(ARG1) not allowed outside a procedure."), ERRCODE_BASIC_NOT_IN_MAIN }, 148 { NC_("RID_BASIC_START", "Dimension specifications do not match."), ERRCODE_BASIC_WRONG_DIMS }, 149 { NC_("RID_BASIC_START", "Unknown option: $(ARG1)."), ERRCODE_BASIC_BAD_OPTION }, 150 { NC_("RID_BASIC_START", "Constant $(ARG1) redefined."), ERRCODE_BASIC_CONSTANT_REDECLARED }, 151 { NC_("RID_BASIC_START", "Program too large."), ERRCODE_BASIC_PROG_TOO_LARGE }, 152 { NC_("RID_BASIC_START", "Strings or arrays not permitted."), ERRCODE_BASIC_NO_STRINGS_ARRAYS }, 153 { NC_("RID_BASIC_START", "An exception occurred $(ARG1)."), ERRCODE_BASIC_EXCEPTION }, 154 { NC_("RID_BASIC_START", "This array is fixed or temporarily locked."), ERRCODE_BASIC_ARRAY_FIX }, 155 { NC_("RID_BASIC_START", "Out of string space."), ERRCODE_BASIC_STRING_OVERFLOW }, 156 { NC_("RID_BASIC_START", "Expression Too Complex."), ERRCODE_BASIC_EXPR_TOO_COMPLEX }, 157 { NC_("RID_BASIC_START", "Can't perform requested operation."), ERRCODE_BASIC_OPER_NOT_PERFORM }, 158 { NC_("RID_BASIC_START", "Too many DLL application clients."), ERRCODE_BASIC_TOO_MANY_DLL }, 159 { NC_("RID_BASIC_START", "For loop not initialized."), ERRCODE_BASIC_LOOP_NOT_INIT }, 160 { NC_("RID_BASIC_START", "$(ARG1)"), ERRCODE_BASIC_COMPAT }, 161 { {}, ERRCODE_NONE } 162}; 163 164/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ 165